Sludge Dewatering Tubes


Sludge Dewatering TUBES Overview

TUBE 70-95 is a typical sediment dewatering geotextile tube sludge dewatering,  It is a high efficiency filtration product designed to effectively deposite silt, sludge, sediment and other unwanted materials from your discharge slurry. The materials can been dewatered as listed below:

  • Municipal water and wastewater sludge
  • Food processing
  • Mining waste
  • Agricultural animal waste
  • Industrial waste
  • Construction waste
  • Contaminated sediments


0.4 0
70 Kn
1200 L
95 Kn
GEOBAG sludge dewatering APPLICATIONS
sludge dewatering tubes
Sludge Dewatering Geotextile

In many cases, sediments pose significant environmental hazards, and remediation is a difficult and expensive task.

Geotextile Dewatering bags

Mine tailings, coal sludge can be managed, handled cost effectively with geotextile tubes. Because they can be custom sized to application. 

Sludge Removal Tube

MDS solution is designed for smaller applications, dewatering of sludge produced in wastewater treatment process.

Dewatering Geo Tube

Rivers, harbors, marinas, ports have been collecting contaminated sediments for many years. In many cases, these sediments pose significant environmental hazards, and remediation is a difficult and expensive task. Geotextile tubes with larger or smaller sizes can be accomplish this mission effectively and reducing their volume dramatically and saving thousands in disposal costs.

Sludge Dewatering

Mine tailings, coal sludge can be managed and handled cost effectively with sludge dewatering bag. Because they can be custom sized to the application, they can be placed in available space between other structures, and removed once dewatering is completed. Sludge dewatering tubes is a cost effective alternative way to mechanical processes. It reduces disposal cost by consolidating higher solids with very little maintenance. 

geobag dewatering

MDS dewatering system is designed for smaller applications or small areas. Geotextile tube unit of 10 or 12 m3 capacity, dimensioned for standard containers, allowed the dewatering of sludge produced in the wastewater treatment process of industry. Sludge dewatering tubes assures an high reduction of the sludge volume to be managed.

Frequently Asked Questions
What is the geotextile dewatering tubes?

Historically, it has been used to contain sandy soils to permit their use as flexible, erosion resistance, mass gravity structures in hydraulic and marine applications. More recently, geosynthetic tube has been used of disposing and dewatering various waste streams and contaminated sediments.

What is the geosynthetic tubes size available?

Boatup dewatering tubes have GTVC software, it can simulator varies of sizes depending on your working site space.

Do I need polymer for geobag sludge dewatering?

A polymer is usually needed and speeds up the dewatering process, makes for clean discharge water, and saves money. As geosynthetic tubes and polymer work better, it is very desirable to return the decant water back to the mian stream.

How does the sludge dewatering tubes work?

When pumping into the tube begins the water will come out through the fabric and the solids remain. Eventually the fine grain materials will plug the fabric and the tube will pump up like a water balloon, then the filter cake will peel off the geotextile fabric. The tube will then dewater rapidly.

How clean can I get the effluent water?

Normally, with right polymer the effluent can meet TSS requirements. However it is especially important when dewatering contaminated materials or releasing to a fragile environment. To get very clean effluent a second treatment is sometimes required. Also, special care needs to be taken at the initial fill of the tube to prevent solids to pass through the fabric.


Whether you’re interested in any types of geotextile tubes, we’re here to quote.