Geo Tube Marine

TUBE120-120

Overview

Geo Tube Marine TUBE 120-120 is weather resistant geotextile tube and filled with sand slurry, to form an artificial coastal structure such as a breakwaters, dykes or levees. They are aligned with the shoreline to weaken wave energy and protect against coastal erosion. It has features as below:

  • Custom fabricated with high seam strength
  • High flow rate allows water to out, while containing solids 
  • Easy operation
  • Competitve price because of good management
  • Small orders are available with fast delivery

TUBE120-120

70 %
Seam Strength Up to
120 Kn
WARP DRECTION
810 L
WATER FLOW
120 Kn
WEFT DRECTION

Geo Tube Marine applications

For Coastal Protection

Sea water erosion, marine storms and high waves, may lead to destructive effects on buildings, installations and beaches in close shores, even causing their collapse.

For Breakwaters

Breakwater is a permanent structure constructed at a coastal area to protect against tides, currents, waves, and storm surges. Some breakwaters are installed to minimize erosion.

For Dykes & Levees

The shoreline has always experienced severe erosion due to the impact of high energy waves, both on the predominantly mud coasts and the predominantly sandy coasts.

geotube groynes

Geotextile Tube Seawall For Coastal Protection

Sea water erosion, marine storms and high waves, may lead to destructive effects on buildings, installations and beaches in close shores, even causing their collapse. Boat geotextile tubes can perfectly protect sites at the shoreline and near the water, by erecting a barrier built of geotextile tubes and placing them one after another, creating a wall near the location to be protected.

  • Easy operation
  • Dramatically low cost
  • Strong enough to protect things behand tube walls
geotube breakwater
Geotextile Tube Shoreline For Breakwaters

Boatup geo containers breakwater is a permanent structure constructed at a coastal area to protect against tides, currents, waves, and storm surges. Some breakwaters are installed to minimize erosion, and to protect anchorages, helping isolate vessels within them from marine hazards such as prop washes and wind-driven waves. Breakwater, also known as a jetty, may be connected to land, and may contain a walkway for vehicle access.

  • Strong enough tube up to strength 200/200Kn
  • Stack to form strong walls
  • Cost saving
geotube dyke

Inland Waterway Protection For Dykes & Levees

The shoreline has always experienced severe erosion due to the impact of high energy waves, both on the predominantly mud coasts and the predominantly sandy coasts. This process has resulted in the deterioration of the quality of the beach on the sandy coasts and loss of valuable land. The application of geotextile tubes for shoreline management was introduced and slove the problem permanently.

  • Strong enough tube up to strength 200/200Kn
  • Stack to form strong walls
  • Cost saving

NEED QUOTATION?

Whether you’re interested in any types of geotextile tubes, we’re here to quote.

Free Quote